Product Name: |
Two Channel Power Amplifier |
Description: |
|
Features: |
- 125 watts rms per channel into 8Ω, all channels driven
- 200 watts rms per channel into 4Ω, all channels driven
- 300 watts rms bridged into 8Ω mono
- 35 amps peak current per channel
- Impedance selector switch for 4Ω/8Ω operation
- Bridging switch for stereo or mono operation
- A/B speaker terminals with individual on/off
- Fully discrete circuitry with toroid transformers
- Relay protection circuits
- Automatic on/off by DC trigger with looping output
- Automatic on/off by audio signal with adjustable sensitivity
- Gold-plated RCA input jacks, loop output jacks
- Heavy duty 24k gold-plated 5-way speaker terminals
- 115/230v selector on rear panel
- Standby, channel status, Over heat, Overload & DC offset voltage protecton indicators
- (W x D x H): 17.25?x 16?x 4.25 ?/ 3.5?without feet
|
Specification: |
- Continuous RMS Power Output
20 Hz - 20 kHz, Both Channels Driven
125 watts x 2, 8 Ω
200 watts x 2, 4 Ω
- Continuous RMS Power Output
20 Hz - 20 kHz, Bridged Mono
400 watts, 8 Ω
- Current Capacity
30 amps peak per channel
- Frequency Response
20 Hz - 50 kHz, +0/-3 dB, 1 watt
- Dynamic Headroom
1.3 dB
- Total Harmonic Distortion
0.008% at 1/2 Rated out put 8Ω Load
0.015% at average listening levels
- IM Distortion
0.05 %
- S/N Ratio
112 dB at rated output, IHF A-weighted
103 dB at rated output, unweighted
- Input Impedance
33 k Ω
- Input Sensitivity
1 V in for 28.28 V out, THX standard
- Inter-Channel Crosstalk
86 dB, 1 kHz
70 dB, 10 kHz
- Damping Factor
Over 150 at 20 Hz
- Trigger Turn On - DC
3 - 30V, AC/DC
- Auto Turn On - Audio
2 mV - 12 mV, adjustable
5 minute turn off delay
- AC Power Requirement
110 - 120 V / 220 -240 V, 50 - 60 Hz
3 watts standby
- Dimensions
17-1/4" Wide
16" Deep with connectors
4-1/4" High with feet, 3-1/2" panel only
437 x 406 x 107mm, 88.2mm panel only
- Net Weight
27 lbs , 12.3 kg
|
Safety Approval: |
|
Other Description: |
|
|
|
|
| This is the information for , Two Channel Power Amplifier which includes model, name, description and specification for , Two Channel Power Amplifier. Related Keywords : Power amplifier, Preamplifier, Phono amplifier, Monoblock amplifier, Integrated Amplifier, |
|
